Welcome to Shenzhen Bogao Marking Technology Co. Ltd.
Service Hotline:
138-0885-1890

Non-standard customization

Contact Us

You are here:Home >> Non-standard customization... >> Label customization...

Label customization

BG312- bottom subsurface labeling machine

Product parameters
Model: BG312
Labeling accuracy: ±1mm (excluding product and label error), the adjustment level obviously affects the labeling accuracy
Labeling speed: 40 ~ 100 PCS/min, depending on product length and quality
Applicable products: length: 50mm ~ 200mm width: 20mm ~ 150mm
Applicable to the maximum diameter of standard volume (mm) : 280mm
Applicable standard volume diameter (mm) : 76mm
Machine size: 1900×800×1400mm (length × width × height)
Applicable power supply: 220V 50HZ
Machine weight: about 160Kg.
    BG312- bottom subsurface labeling machine
    Product use
          Bottom (bottom plane) labeling machine is applicable to the product bottom plane, concave surface, concave surface labeling, mainly used for daily chemical, food products precision labeling, such as chocolate packaging box, toy packaging box, flower pot, glue packaging box bottom anti-counterfeiting label. The bottom labeling machine adopts man-machine operation interface, with high degree of automation and easy operation. At the same time, this labeling machine is selected with imported control system, electrical components and pneumatic components system, so that the equipment far turn more stable, to ensure that the label surface no bubbles, no wrinkles, label flat, is the best bottom labeling equipment.
    Bottom of the plane labeling machine
    Product application cases:
    Bottom of the plane labeling machine case

    Working principle:
    When the sensor detects the passing of the product, it transmits the signal to the labeling control system PLC. After the signal is processed by the PLC high-speed operation, the sticker is sent at an appropriate time and attached to the set position of the product. The product passes through the labeling device.
    Operation mode:
    Product placement (connected pipeline) -- > product delivery (automatic implementation) -- > product correction (automatic implementation) -- > product detection (automatic implementation) -- > labeling (automatic implementation) -- > review (automatic implementation) -- > collection of labeled products.
    Sticker production requirements:
    Label production requirements
    The spacing between labels is 2-4mm
    The label is 2mm from the bottom edge
    Label backing paper is made of grassine, which is strong enough to avoid breaking (avoid cutting) the backing paper.
    Coil core inner diameter 76mm, outer diameter less than 280mm, single row arrangement.
    The above label production needs to be combined with your product, please contact our engineers for specific requirements and the result shall prevail!
    Product features:
    High labeling accuracy: subdivision stepper motor or servo motor drive bid delivery, bid delivery accuracy; Design of deviation rectifying mechanism for belt winding to ensure no deviation during label traction; Eccentric technology applied in traction mechanism, traction label does not slip, to ensure accurate labeling.
    Rugged and durable: adopt three-bar adjusting mechanism, make full use of the stability of triangle, the whole machine is solid and durable
    High stability: the advanced electronic control system composed of mitsubishi PLC+ Taiwan velon touch screen + panasonic needle shaped eye + sike measuring mark sensor supports 7×24 hours operation of the equipment.
    Flexible application: single machine production or assembly line production, production site layout simple
    Intelligent control: automatic photoelectric tracking, with no labeling, no labeling automatic correction and label automatic detection function, to prevent missing labeling and label waste
    Touch screen operation interface, full Chinese notes and perfect fault prompt function, a variety of parameters adjustment simple and quick, easy to operate.
    Powerful functions: with production counting function, power saving function, production number setting prompt function, parameter setting protection function, convenient production management.
    Optional functions and components:
    (1) hot code/spray code function
    (2) automatic feeding function (combined with product consideration)
    (3) automatic feeding function (combined with product consideration)
    (4) increase labeling device
    Other functions (customized according to customer requirements)
    Please submit your basic information, we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Copyright © 2019 Shenzhen Bogao Marking Technology Co. Ltd. All Rights Reserved. 粤ICP备19100904号   
Web Design—Tiandixin
<<
Baidu
sogou
>>